X Pen HELP!! Can't find what we need!!

Forum

OUR FORUM IS UP BUT WE ARE STILL IN THE MIDDLE OF UPDATING AND FIXING THINGS. SOME THINGS WILL LOOK WEIRD AND/OR NOT BE CORRECT. YOUR PATIENCE IS APPRECIATED. We are not fully ready to answer questions in a timely manner as we are not officially open, but we will do our best.

You may have received a 2-factor authentication (2FA) email from us on 4/21/2020. That was from us, but was premature as the login was not working at that time.

BUNNY 911 – If your rabbit hasn’t eaten or pooped in 12-24 hours, call a vet immediately! Don’t have a vet? Check out VET RESOURCES

The subject of intentional breeding or meat rabbits is prohibited. The answers provided on this board are for general guideline purposes only. The information is not intended to diagnose or treat your pet. It is your responsibility to assess the information being given and seek professional advice/second opinion from your veterinarian and/or qualified behaviorist.

What are we about? Please read about our Forum Culture and check out the Rules.

BUNNY 911 – If your rabbit hasn’t eaten or pooped in 12-24 hours, call a vet immediately! Don’t have a vet? Check out VET RESOURCES

BINKYBUNNY FORUMS

This topic has 2sd replies, 3 voices, and was last updated 3 years, 11 months ago by Wick & Fable.

Viewing 2 reply threads

Author

Messages
- 05/10/2020 at 3:04 PM
  Losgunna86
  Participant
  13 posts
  Okay guys, we have one week left before we go to pick up our new bun bun of joy! Problem is we haven’t finished the enclosure yet! We had originally wanted to do a plexiglass and wood enclosure. We already made a nice wood floor with linoleum bottom. We can’t seem to get the plexiglass cut to the dimensions we want without cracking them. We haven’t fully given up on that idea, but in the mean time, we figured we should just get an x pen of the dimensions we need.
  
  We can’t for the life of us, find an x pen that will fit our measurements!! It’s not like we’re using strange dimensions either. It’s a rectangle shape 6ft long by 4ft wide, and preferably 32 inches tall, but that’s not super important as we will figure out a top. All the x pen’s we see are 8 panels of 24 inches wide. Which would mean we would need 10 panels. Why on earth can’t we find what we need????
  
  ANY suggestions?!?!
  
  Thanks!!
- 05/10/2020 at 4:14 PM
  DanaNM
  Moderator
  8935 posts
  Not sure about a specific x-pen, but my favorite thing to use are storage cube grids (“neat idea cubes”) which can be connected with cable ties into whatever configuration you want. I use them a lot for temporary housing and fencing.
  
  . . . The answers provided in this discussion are for general guideline purposes only. The information is not intended to diagnose or treat your pet. Seek the advice of your veterinarian or a qualified behaviorist.
- 05/10/2020 at 4:25 PM
  Wick & Fable
  Moderator
  5781 posts
  Some x-pens that you’ll find will also sell expansion grids and such that can be latched on very securely and look like it was part of the original. Is it possible to create what you are looking for by looking at smaller sizes, then seeing what expansion panels are available?
  
  The Midwest Home for Pets is actually that size. I just measured mine, and they come in different heights. From my recollection, the standard is 8 panels, which will be 4’x4′, and then you can buy 2-panel extensions!
  
  The answers provided in this discussion are for general guideline purposes only. The information is not intended to diagnose or treat your pet. Seek the advice of your veterinarian or a qualified behaviorist.
Author

Messages

Viewing 2 reply threads

You must be logged in to reply to this topic.