Help NIC cube doors?

[bunnytowne]

uh well… I put it together real nice and made a dirty clothes thingy too. cool. and have enurfto make  2 cages  or a huge one only thing. uh how do I make a door I don’t have swinging things. just the things that hold the corners together. What do you use for the door to open and shut. or do I just pick the thing up and let the bun out ahaha.

[kimberleyanddarren]

i put the cable ties on one side but not the other 3 on one of the cubes and then got a small clip which keeps it closed so it cant be opened. i dnt think letting the bun out under is a good idea lol

[Scarlet_Rose]

I put the cable ties (not all the way tight) on the top so the door swings upwards and you aren’t banging or running into them. I clip them with a scissor snap lock so they stay up. I do no recommend hinging them on the bottom so the panel flops down for a bunny to hop on as they can catch their nails or foot in the grate.

[Alicia Conklin]

If you use the connectors that came in the box that would be why it’s hard to imagine how to put in a door!  I think most people use cable ties, that’s what I used.  You could probably use a mix of both though and when you get to the door part don’t put any connectors and just the cable ties.  Then like everyone else was saying you only put the ties on the one side and then get like a big binder clip (or three which is what I have) to hold it shut.  Even on the ones that you have held together by the connectors I would put some cable ties on for reinforcement to make sure the a connector doesn’t give way and make the thing sag or topple

[Author]

Messages